Resin Infusion Distribution Netting , Industrial Plastic Netting , Red Color , 1.0 Meters Wide

1. Description of Production

Vacuum Infusion Mesh is used in resin infusion projects to distribute the resin across and throughout the laminate. The mesh is a "criss cross" pattern of flexible plastic that facilities resin flow ensuring that resin reaches all the parts of the part.

infusion mesh can also be used selectively to increase resin flow to certain areas of the mould and increase the speed with which the project infuses. Infusion mesh can be used in multiple layers where even greater resin flow is required.

This is the polymer mesh having diamond aperture, used in advance composite industry. It is layed flat through out the mould surface to ensure the even flow of resin throughout the mould surface.

The tight, low profile crisscross pattern of the infusion mesh distributes a controlled, predictable flow of resin throughout the laminate efficiently and with little waste. The resin will flow slightly slower compared to the red infusion mesh.

It is used under high vacuum and can withstand high negative pressure. It is generally used in green colour for better visual clarity of flow of the resin throughout the mould surface. After the resin is cured it is removed from the surface of the mould area.

2. Specification of Production

3. Application

► Wind turbine blades
► The flow and infiltration of resins
► Water and air filter applications

► Fencing screen / garden fencing, temporary and permanent applications

► Vacuum assisted forming of composite materials

4. Features

► Even hole

► Light weight

► Stable performance

► Good toughness

► Shock resistance